Fire Hooks Unlimited

Fire Hooks Unlimited is the leading manufacturer of fire hooks, fire tools and fire equipment. The owner, Bob Farrell, has had an historic career with the New York City Fire Department and has been one of the most valuable and influential fire equipment manufacturers for nearly three decades.

Pro Bar Features:

• Halligen type entry tool recognized worldwide; the most utilized tool in the fire and rescue service today; 30″ in length and industry standard.
• Drop forged, one piece of construction alloy steel.
• The fork, adz, and point are designed with proper lengths, widths, and taper to enable easy penetration for maximum leverage.

Maxximus Features:

• Can be purchased individuality as well
• You can switch out the Duo (2″ Adz) for the Duo-MOD(2 3/4″ Adz) or Duo-Rex(2 3/4″ Adz & Lock puller)
• One piece drop forged forcible entry tool 
• Made of 4140 chrome vanadium steel 
• A completely “tuned” Halligan  
• Rex lock pulling feature. 
• Standard 30-inch length. 
• Square legs on the fork for striking in tight spaces 
• Molded T.P.R. grip to lessen slippage 
• Protective insulation to 24,000 volts 
• Nearly 2 lbs. lighter than the Pro-Bar Halligan

Lock slot 8 lbs. Axe Features:

• Can be purchased individuality as well
• Perfect balance when in the hand of the user for striking the Maxximus
• Dropped forged head of high carbon steel, rockwell heat-treated and coated with anti-rust nickel plate.
• Marrying slot designed to lock the axe to the Maximus, no strap required.
• Single Hand Carrying
• Easy quick release – tap handle on surface to separate pair.
• Special triple strength fiberglass handle with a deer’s hoof knurled bottom grip and thermo rubber handle.

Pro Bar Features:

• Can be purchased individuality as well
• Halligen type entry tool recognized worldwide; the most utilized tool in the fire and rescue service today; 30″ in length and industry standard.
• Drop forged, one piece of construction alloy steel.
• The fork, adz, and point are designed with proper lengths, widths, and taper to enable easy penetration for maximum leverage.

8 lbs. Maul Features:

• Can be purchased individuality as well
• 28” fiberglass handle
• Celtex grips for a sure grip
• Will fit onto most truckman’s belts

Talon Hook Features:

• Lightweight all-steel head and pole
• Halligan Claw hook for prying, pulling, and forcible entry
• NY Roof style Talon Hook head is specially tapered for a variety of uses
• Features Celtex grips at middle of tool for efficient handling
• Can be purchased in variety of sizes of 5ft, 6ft, 7ft up to 8ft.

Hydra Ram Features:

• Hydra-Ram has a maximum thrust opening of 4.” ( Opening of 6″ if you purchased Hydra Ram II)
• No need to worry about maintenance or leaking fluids.
• The Hydra-Ram uses aircraft seals of triplex quality.
• The hydraulic fluid is non-flammable, non-toxic, and non-freezing.
• The jaws are made of special stainless steel of 220,000 tensile strength.
• 10,000 lbs. of force is acquired at 138 lbs. pressure at the handle.
• While other units may take 30 to 40 stroke son the pump to gain full extension, the Hydra-Ram does it in 8 strokes.
• The Hydra-Ram can be used in any position, even upside down, without affecting its operation.
• Hydra-Ram I: length 13 ” and weight of 11 lbs.
• Hydra-Ram II: length 15 ” and weight of 13 lbs.

Roof Hook Features:

• All-purpose head
• Aircraft steel shaft
• Chisel end
• Celtex grips

Fire Hooks Unlimited FireMaxx Tool 14 in 1 features in a one piece Firefighting Tool is versatile & dependable! This tool is one piece drop forged and treated with self extinguishing celtex grips.

• Axe
• Hammer
• Spanner Wrench
• Windshield Cutter
• Rappelling Ring
• Gas Shut-Off
• Water Shut-Off
• Battery Disconnect
• Dry Wall Cutter
• Forcible Entry
• Hinge Remover
• Pry Bar
• Stortz Latch Opener
• Hood Remover

• Each key is on its own split ring for easy removal of individual keys.
• Manufactured to conform with the majority of elevator manufacturer access keys.
• Keys are hard anodized in a gold color plated to resist rust.

The 12 keys Included:

• Volt resistant key with a 5000-volt resistance as tested in a salt bath
• Swing door key
• Rib key “T” style
• Vandal-proof access key
• Half-moon (large)
• Half-moon (small)
• Drop key adjustable
• Side exit key
• Knife key fluted
• “Z” key
• Shove knife
• Kerry key

The Pocket Elevator Door Tool was developed due to the retrofit of high rise residential housing elevator swing-out doors. Because earlier version of elevator doors could be opened so easily on all floors by vandals, changes had to be implemented. The new “pocket doors” were designed with the locking mechanism in a protective box on the door edge. The Pocket Door Key can be used with the included 3 key set to open these newer style pocket elevator doors. Instructions Included.

This is the latest in extinguisher can harnesses. It is held in place by two 3″ Velcro straps and a safety strap with a D ring, which goes through the can’s hanging bracket.

Features:

• Excellent on cans (fire extinguishers) with plastic bottoms.
• Carry either horizontally or vertically.
• It also can be used with 2.2 size SCBA bottles for easy carrying.

10” Cable Cutter

• The perfect pocket size cutter.
• 10 inches long.
• Up to 7/8″ diameter
• Perfect for battery terminals and other small cuts
• Handle color may vary from color shown